DataSheet8.cn


PDF ( 数据手册 , 数据表 ) UPC1663G-E1

零件编号 UPC1663G-E1
描述 DC to VHF WIDEBAND DIFFERENTIAL INPUT AND OUTPUT AMPLIFIER IC
制造商 NEC
LOGO NEC LOGO 


1 Page

No Preview Available !

UPC1663G-E1 数据手册, 描述, 功能
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC1663
DC to VHF WIDEBAND DIFFERENTIAL INPUT AND OUTPUT AMPLIFIER IC
DESCRIPTION
The µPC1663 is a differential input, differential output wideband amplifier IC that uses an high frequency silicon
bipolar process. This process improves bandwidth phase characteristics, input noise voltage characteristics, and low
power consumption when compared to conventional HF-band differential amplifier ICs.
These features make this device suitable as a wideband amplifier in high-definition TVs, high-resolution monitors,
broadcasting satellite receivers, and video cameras, as a sense amplifier in high-density CCD and optical pick-up
products, or as a pulse amplifier for optical data links.
These ICs are manufactured using NEC’s 6 GHz fT NESATTM I silicon bipolar process. This process uses silicon
nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and
prevent corrosion/migration. Thus, these ICs have excellent performance, uniformity and reliability.
FEATURES
• Bandwidth and typical gain : 120 MHz @ AVOL = 300
700 MHz @ AVOL = 10
• Phase delay
: –85 deg. @ AVOL = 100, 100 MHz
• Input Noise Voltage
• Supply Current
: 3 µVr.m.s. (RS = 50 , 10 k to 10 MHz)
: 13mA TYP. @ VCC± = ±6 V
• Gain adjustable from 10 to 300 with external resistor
• No frequency compensation required (Small phase delay at 10 MHz or less)
ORDERING INFORMATION
Part Number
µPC1663G-E1
Package
8-pin plastic SOP (225 mil)
µPC1663GV-E1 8-pin plastic SSOP (175 mil)
Marking
1663
Supplying Form
Embossed tape 12 mm wide.
Pin 1 is in tape pull-out direction.
Qty 2.5 kp/reel.
Embossed tape 8 mm wide.
Pin 1 is in tape pull-out direction.
Qty 1 kp/reel.
Remark To order evaluation samples, please contact your local NEC sales office. (Part number for sample order:
µPC1663G, µPC1663GV)
Caution µPC1663C (8-pin plastic DIP) is discontinued.
Caution Electro-static sensitive devices
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. G11024EJ6V0DS00 (6th edition)
Date Published September 1999 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1987, 1999







UPC1663G-E1 pdf, 数据表
APPLICATION CIRCUIT EXAMPLES
EXAMPLE 1
Video Line Driver Circuit Example
+6 V
µPC1663
Input
75
µPC1663
0.1 µF
200 75
75
200
–6 V
MAXIMUM OUTPUT VOLTAGE vs. FREQUENCY (VIDEO LINE, SINGLE-ENDED)
VCC± = ±6 V
2.0
COAXIAL
Output
75
1.0
Remark
Differential output voltage is double of single-ended output voltage.
0
100 k
1M
10 M
100 M
Frequency f (Hz)
1G
PHASE CHARACTERISTICS vs. FREQUENCY
VCC± = ±6 V
0
–45
–90
–135
–180
100 k
Gain 2
Gain 1
1 M 10 M
Frequency f (Hz)
100 M
8 Data Sheet G11024EJ6V0DS00







UPC1663G-E1 equivalent, schematic
µPC1663
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
NESAT (NEC Silicon Advanced Technology) is a trademark of NEC Corporation.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a device described herein or any other liability arising from use
of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.
Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated "quality assurance program" for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
M7 98. 8










页数 16 页
下载[ UPC1663G-E1.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
UPC1663G-E1DC to VHF WIDEBAND DIFFERENTIAL INPUT AND OUTPUT AMPLIFIER ICNEC
NEC
UPC1663G-E1ULTRA-WIDEBAND DIFFERENTIAL VIDEO AMPLIFIERNEC
NEC

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap